These simple recommendations help you avoid problems with the doors subsequently. Neither a sufficiently severe frost, nor swearing neighbors, no uninvited guests will penetrate your house.
When the outer door is mounted, it is directly insulated. This is not very difficult to do using specialized sealing materials, which can be bought in a store or made with your own hands. They are done like this. A strip of dermatine is 100-120 millimeters wide, as well as a length corresponding to the length of the 3-bars of the door box (both vertical, as well as one horizontal). You will also need a strip of foam rubber 3-4 millimeters with thickness and, in addition, that length that, as well as a strip of dermatin.
The foam rubber turns into a granitol. The dermatin strip is fastened at the site of joint.
The sealing material is nailed right along the door box along two vertical cubes and, in addition, the upper horizontal, closing the gap between the box of the door, the door.
The outer door must certainly open outside. So it will be unacceptable to knock out. The best option is a strong, as well as a very reliable door – metal or two -time. External – metal, and internal – from each material.
It is necessary to directly install reliable locks with several degrees of protection on the outer door. The main door of the house should also have a strong steel constipation or a rather reliable small chain on the inside, which is incredibly opened from the outside. Also you need a peephole in the door. Nowadays, the eye with a panoramic review of 200 ° has been recognized as the best.
The noise of adjacent living rooms can also be avoided, and if you perform the outer door soundproof. To do this, you can also use polystyrene, felt, vatin or a old blanket. Soundproof pads are made from this material. According to the door size of pine racks about 20 millimeters thick, a frame is made with a width in the region of 30 millimeters, which is further fixed to the door using transverse slats. Holes are drilled in the door, with self -tapping screws (screws) attach an even plate to the frame. Pits leaving screws (self -tapping screws) can also be filled with a window putty, smooth out with a skin and, in addition, cover with an oil -based paint or appropriate varnish composition.