The currently currently statistical data indicate that the malfunction of electrical networks in most cases leads to fires that entail material losses of large sizes. In this regard, in the process of installing electrical wiring, experts recommend that a number of basic rules are required to observe.
First of all, in the process of laying electrical wiring, you should use materials and elements of high quality, the samples of which can be found on Setevuha, as well as have the necessary level of special knowledge and skills. In case of their absence, this kind of work is best entrusted to specialists.
It is very important to remember that it is strictly forbidden to fasten the wires to the combustible base using nails. For this, it is recommended to use special mounts, for example, such as cable clamps, as well as metal and whether vinyl pipes in which the actual wiring itself should be placed.
In the absence of such the possibility of the wire should be laid on the base in the form of asbestos fabric or a plate of gypsum fiber. To form a dense harness of multi -core wiring, a plastic screed is used.
The joints and branches of the wires should be made using connecting and branch modules, which are fixed on the walls on a wooden base using screws. In order to prevent oxidation of the cores, wired joints and ends of the veins must be carefully wrapped with insulation.
For the convenience of laying wires in the boxes, cable screeds are used. In places where it is impossible to avoid the intersection of the wiring, one of them should be wrapped in several layers of insulating tape in the area of 2-3 centimeters.
The wiring to the lamps should be laid through the ceiling, and to switch and sockets – through the floor. Fastening ceiling lamps is carried out by strengthening special hooks in the ceiling floors, which should be isolated using special plastic tubes. To create a convenient wiring for a co -wiring cable, a clamp is used, thanks to which the wires are well attached and do not occupy a lot of space.